Conducted electromagnetic interference simulation modeling of energy conversion equipment

DOI: 10.21293/1818-0442-2025-28-1-67-74

Download article in PDF format

JATS xml

Abstract: The problem of conducted current interference simulation modeling of energy conversion equipment is considered. The proposed approach allows to calculate common-mode and differential-mode current components by taking into account the influence of stray parameters of electronic components and stray couplings of structural elements of devices and units in the simulation model. Using the example of the simulation model of one module of a charge-discharge device of energy conversion equipment, the calculation of its stray parameters is considered, and a spectral analysis of input and output current interference in the charging mode is presented.

Keywords: stray parameters, simulation modeling, commonmode and differential-mode components of input and output current, energy conversion equipment, charge-discharge device

For citation:
Podhomutnikova G. M., Lekarev A. F., Kostarev I. S. Conducted electromagnetic interference simulation modeling of energy conversion equipment. Doklady Tomskogo gosudarstvennogo universiteta sistem upravleniya i radioelektroniki, 2025, vol. 28, no. 1, pp. 67–74. DOI: 10.21293/1818-0442-2025-28-1-67-74

Authors and copyright holders:

  • Podhomutnikova G. M. , JSC «Scientific and Production Center «Polus» (Tomsk, Russia)
  • Lekarev A. F. , JSC «Scientific and Production Center «Polus» (Tomsk, Russia)
  • Kostarev I. S. , JSC «Scientific and Production Center «Polus» (Tomsk, Russia)

  • 1. Belyaev A.A., Shchuchkin E.Yu. Metod ocenki konduktivnyh pomekh DC-DC preobrazovatelya na etape proektirovaniya [Method for assessing the level of conducted interference of a DC-DC converter at the design stage]. Problems of Development of Advanced Micro- and Nanoelectronic Systems (MES). M., IPPM RAS, 2022, no. 3, pp. 63–74 (in Russ.).
  • 2. Balashov N.Yu., Lekarev A.F., Kostarev I.S. Model effectivnosti ekranirovaniya korpusa dlya issledovaniya oslableniya elektromagnitnyh polej [Model of the efficiency of case shielding for studying the attenuation of electromagnetic fields]. Electronic and Electromechanical Systems and Devices, Tomsk, JSC «SPC «Polus», 2023, pp. 350–354 (in Russ.).
  • 3. Kazantsev Yu.M., Kostarev I.S., Lekarev A.F., Proektnyj analiz elektromagnitnoj sovmestimosti reguliruyushchej apparatury avtonomnyh sistem elektropitaniya [Design analysis of electromagnetic compatibility of control equipment of autonomous power supply systems]. Bulletin of the Tomsk Polytechnic University. Power Engineering, no. 4, vol. 317, 2010, pp. 124–128 (in Russ.).
  • 4. Bokov G..Yu. Elektromagnitnye pomekhi impul'snyh preobrazovatelej [Electromagnetic interference of pulse converters]. Electronic Components, 2018, no. 3, pp. 8–11 (in Russ.).
  • 5. Volin M.L. Parazitnye processy v radioelektronnoj apparature [Parasitic processes in radio-electronic equipment]. Moscow, Radio and Communications, 2nd ed., revised and enlarged, 1981, 296 p. (in Russ.).
  • 6. Kalimulin I.F., Gazizov T.R., Zabolotsky A.M. Metodiki i modeli dlya ucheta parazitnyh parametrov pechatnyh uzlov pri analize elektromagnitnoj sovmestimosti bortovoj radioelektronnoj apparatury kosmicheskih apparatov [Methods and models for taking into account parasitic parameters of printed circuit boards when analyzing the electromagnetic compatibility of onboard radio-electronic equipment of spacecraft]. Tomsk, Publishing house of Tomsk State University of Control Systems and Radioelectronics, 2015, 160 p. (in Russ.).
  • 7. Kechiev L.N. Spravochnik po raschetu elektricheskoj emkosti, induktivnosti i volnovogo soprotivleniya v elektronnoj apparature: inzhenernoe posobie [Handbook of Calculation of Electrical Capacitance, Inductance, and Wave Impedance in Electronic Equipment: Engineering Manual]. M., Grifon, 2021, 280 p. (in Russ.).
  • 8. Iossel Yu.Ya., Kochanov E.S., Strunsky M.G. Raschet elektricheskoj emkosti [Calculation of Electrical Capacitance]. Leningrad, Energoizdat. Leningrad Branch, 2nd ed., revised and enlarged, 1981, 288 p. (in Russ.).
  • 9. Polonsky N.B. Konstruirovanie elektromagnitnyh ekranov dlya radioelektronnoj apparatury [Design of Electromagnetic Screens for Electronic Equipment]. M., Sov. Radio, 1979. 216 p. (in Russ.).
  • 10. Donnelly T.J., Pekarek S.D., Fudge D.R., Zarate N. Thvenin equivalent circuits for modeling coupled common/differential-mode behavior in power electronic systems. IEEE Open Access Journal of Power and Energy, 2021, vol. 8, pp. 377–388.
  • 11. Kharanaq F.A., Emadi A., Bilgin B. Modeling of conducted emissions for EMI analysis of power converters: Stateof-the-art review. IEEE Access, 2020, vol. 8, pp. 189313–189325.
  • 12. Didat M., New C.D., Choi S., Lemmon A. Improved methodology for conducted EMI assessment-ment of wide band-gap power electronics. IEEE Open Journal of Power Electronics, 2022, vol. 3, pp. 731–740.
  • 13. Wang Y., Wen H., Hou X., Tang H., Sun H., Zheng K., Li S. Comparison of differential-mode and mixed-mode conducted emission for household appliances in power-line communication system. IEEE Transactions on Electromagnetic Compatibility, 2017, vol. 59, no. 6, pp. 2023–2028.
  • 14. Gazizov T.R. Osnovy elektromagnitnoj sovmestimosti radioelektronnyh sredstv: uchebnoe posobie [Fundamentals of electromagnetic compatibility of radio-electronic means: a tutorial]. Tomsk, Publishing house of Tomsk State University of Control Systems and Radioelectronics, 2022, 138 p. (in Russ.).
  • 15. Kechiev L.N. Proektirovanie pechatnyh plat dlya cifrovoj bystrodejstvuyushchej apparatury [Design of printed circuit boards for digital high-speed equipment]. M., OOO «Group IDT», 2007, 616 p. (in Russ.).
  • 16. Williams T. EMS dlya razrabotchikov produkcii. [EMC for product developers]. M., Publ. house «Technology», 2003, 540 p. (in Russ.).
  • 17. Knyazev A.D., Kechiev L.N., Petrov B.V. Konstruirovanie radioelektronnoj i elektronno-vychislitelnoj apparatury s uchetom elektromagnitnoj sovmestimosti [Design of radioelectronic and electronic-computing equipment taking into account electromagnetic compatibility]. M., Radio and Communication, 1989, 224 p. (in Russ.).
  • 18. Kechiev L.N. Elektrofizicheskie osnovy konstruirovaniya elektronnoj apparatury: inzhenernoe posobie [Electrophysical foundations of designing electronic equipment: engineering manual]. M., Grifon, 2020, 480 p. (in Russ.).
Editorial office address

Executive Secretary of the Editor’s Office

 Editor’s Office: 40 Lenina Prospect, Tomsk, 634050, Russia

  Phone / Fax: + 7 (3822) 701-582

  journal@tusur.ru

 

Viktor N. Maslennikov

Executive Secretary of the Editor’s Office

 Editor’s Office: 40 Lenina Prospect, Tomsk, 634050, Russia

  Phone / Fax: + 7 (3822) 51-21-21 / 51-43-02

Subscription for updates